Deutsch English TÜRKÇE Russian

Categories

Manufacturer

More about...

Informations

Другие темы

[<<First] | [<Back] | 5 Articles in this categorie

KMR600-INJECTION-C80 - complete Set

KMR600-INJECTION-C80 - complete Set

106,98

incl. Tax excl. Shipping costs

Shipping time: 1-2 days*

106,98 per штука
C80 Creme Sets:
Set 1 / 1x 600ml C80 bag (ArtNr.: 9001010795 )
Weight: 1.500 kg
  106,98
Set 2 / 3x 600ml C80 bag (ArtNr.: 9001010796 )
Weight: 3.500 kg
  171,60
Set 3 / 5x 600ml C80 bag (ArtNr.: 9001010797 )
Weight: 6.000 kg
  235,02
Set 4 / 10x 600ml C80 bag (ArtNr.: 9001010798 )
Weight: 8.100 kg
  398,65
KMR600-INJECTION-C80 - complete Set KMR600-INJECTION-C80 - complete Set

900101079.. KMR600-INJECTION-C80


VOC-free injection cream against rising damp in masonry!


It was specially developed for masonry drainage using pressure-free borehole injection.
 

Set 1 consists of:

  • 1x KMR600 caulking gun
    -
    comes with replaceable piston for bag and cartridge

  • 1x 600ml sachet fluid injection cream C80
  • 1x pair Showa gloves 160-PVC, oil resistant size XL

Set 2 consists of:

  • 1x KMR600 caulking gun

    - comes with replaceable piston for bag and cartridge

  • 3x 600ml sachet fluid injection cream C80
  • 1x pair Showa gloves 160-PVC, oil resistant size XL

Set 3 consists of:

  • 1x KMR600 caulking gun

    - comes with replaceable piston for bag and cartridge

  • 5x 600ml sachet fluid injection cream C80
  • 1x pair Showa gloves 160-PVC, oil resistant size XL


Set 4 consists of:

  • 1x KMR600 caulking gun

    - comes with replaceable piston for bag and cartridge

  • 10x 600ml sachet fluid injection cream C80

  • 1x pair Showa gloves 160-PVC, oil resistant size XL


The MAFA professional cartridge gun KMR600 has a sturdy and handy body made of metal. The tube is rotatable and removable, with sturdy plastic screw caps. The piston is made of sturdy plastic and the piston rod is made of metal. The pistol can be operated with one hand. With the same hand, the lever for piston relief is actuated. Each unit comes with a metal piston (for cartridges), an injection probe, and a plastic spray nozzle (see picture).

MAFA fluid Injection Cream C80 is a special cream that is primarily used to seal rising damp in masonry. The solvent-free, ready-to-use emulsion is introduced into a masonry joint by pressureless injection with the MAFA KMR600 caulking gun into previously drilled holes. The creamy horizontal barrier then spreads reliably in the masonry and forms a permanent, water-impermeable moisture barrier. A further rise of moisture is prevented safely and sustainably in this way.

  • ready-to-use sealing liquid with very good penetration in mineral substrates (concrete, sand-lime brick, natural stone, plaster, bricks)

  •  Moisture level up to 95%

  • drastic reduction of water absorption, as water-repellent effect permeable (no impairment of water vapor permeability) 

  • solvent-free, very high active ingredient content (about 80%)

  • very simple and fast application


Application and processing instructions

Basics:
The injection takes place directly in the boreholes.

Processings:
For the injection holes (d = 12mm) with a maximum of 12.5cm in the horizontal bearing joint created (as directly as possible on the vertical butt joints). The holes should end 4-5cm in front of the wall outside. Subsequently, the holes are freed from the drilling dust by blowing. The MAFA C80 Horizontal Barrier is pressed into the holes by hand (use the MAFA KMR600 Caulking Gun). For this purpose, the injection tube is inserted into the drill holes to the full depth and slowly withdrawn during the press-fitting process. Each hole is filled up to one centimeter in front of the viewing area starting from the back. Immediately after filling, the borehole is filled with a mortar plug.

Consumption:
8
holes (diameter 12mm) in row per running m wall surface

Wall thickness                    Consumption on 1m wall length
18cm                                    0,2 bag
24cm                                    0,3 bag
36cm                                    0,6 bag
45cm                                    0,8 bag

Exact consumption must be determined object-related.

Hints:
MAFA fluid C80 injection cream can penetrate the component to the surface. Any white discoloration that may occur can be brushed off after drying.

Cleaning:
Clean up impurities and splashes immediately. Pack the mop in a plastic bag and dispose of it properly. Contaminated surfaces should be washed off with warm soapy water.

OSH:
When injecting, gloves made of nitrile rubber, protective goggles (can be found in the area of occupational safety) and body-covering clothing should be worn. If contaminated, immediately remove clothes and wash skin. If MAFA fluid C80 Injection Cream gets into your eyes, rinse immediately with cold water for 1-15 minutes. Then an ophthalmologist should be consulted. For details see safety data sheet.

Storage:
Cool, dry and frost-free, stable for at least 12 months in a closed original container.

 

Customers who bought this product bought also the following products:

Horizontal Barrier Injection Creme C80

Horizontal Barrier Injection Creme C80

solvent-free - with 80% active ingredients

against rising damp - especially for exposed masonry, bricks, natural stones, etc.

90010107.. Injection Creme C80 -Solvent-free special cream based on Silane


Product Description
:
Injection Creme C80 is used as an injection means for eliminating rising damp in building masonries. The injection of the cream into the masonry or mortar joints without pressure through horizontal holes. Injection Creme C80 can also be applied at high moisture penetration. Especially for exposed masonry, bricks, natural stone, etc.

Not suitable for porous concrete.

Application Areas:
- Ready to use
- Based on Silane, solvent free
- High productive, low consumption
- Optimized for non-pressure application
- Simple, quick and safe to use
- For high moisture penetration

Operation / Characteristics: Narrowing and water repellency of existing capillaries, thus interrupting the capillary absorbency

Environmentally friendly: Only a small amount of plastic in the tubular bag, larger quantities in the metal bucket.

 

40,94  (incl. Tax excl. Shipping costs)
Crack Injection Set 3 Steel with Epoxy Resin POX

Crack Injection Set 3 Steel with Epoxy Resin POX

For repaire of cracks in basement walls, concrete floors, concrete walls and many more

1040539997 Crack Injection Set 3 Steel with Epoxy Resin POX

186,59  (incl. Tax excl. Shipping costs)
[<<First] | [<Back] | 5 Articles in this categorie

Как к нам добраться

MAFA-Sebald Produktions-GmbH

Langscheider Str. 45-47
58339 Breckerfeld
Deutschland

Telefon: +49 2338 9169-0
Fax: +49 2338 9169-40

E-Mail: info@mafa-sebald.com

Welcome back !

eMail Address:
Password:
Password forgotten?

Варианты оплаты

Для зарегистрированных пользователей:
Счет также доступна!
Создайте аккаунт прямо сейчас без обязательств!


PayPal-Bezahlmethoden-Logo

Sichere Überweisung

Sicherer Umgang mit Ihren Daten

Reviews