Deutsch English TÜRKÇE Russian
[<<First] | [<Back] | [Next>] | 4 Articles in this categorie

Horizontal Barrier Injection Creme C80

Horizontal Barrier Injection Creme C80

39,90

incl. Tax excl. Shipping costs

Shipping time: 1 week*

66,51 per Liter
Sliding-scale prices:
1-2 pcs 39,90 per pcs ( 66,51 per Liter)
3-4 pcs 37,91 per pcs ( 63,18 per Liter)
5-9 pcs 35,91 per pcs ( 59,86 per Liter)
10-19 pcs 33,92 per pcs ( 56,53 per Liter)
> 20 pcs 31,92 per pcs ( 53,21 per Liter)
Packing Unit:
600ml Saussage (ArtNr.: 9001010701 )
Weight: 0.546 kg
  39,90
5 L bucket (ArtNr.: 9001010702 )
Weight: 8.000 kg
  214,71
Horizontal Barrier Injection Creme C80 Horizontal Barrier Injection Creme C80

 90010107.. Injection Creme C80 - Solvent-free special cream based on Silane - Horizontal Barrier against rising damp 

Injection Creme C80 is an aqueous, solvent-free injection cream with 80% active ingredient

 

Environmentally friendly: Only a small amount of plastic in the tubular bag, larger quantities in the metal bucket.


Product Description
:
MAFA injection cream C80 is a cream-like, VOC-free impregnating agent based on alkylalkoxysilanes. It offers comprehensive and permanent protection for masonry and facade against water ingress. MAFA injection cream C80 was specially developed for masonry drainage by means of pressure-free borehole injection and for use on mineral building material surfaces. Eliminates rising damp in building masonry. The cream is introduced into the masonry or the mortar joints without pressure via horizontal drill holes. MAFA injection cream C80 can also be used for high levels of moisture. Especially for exposed masonry surfaces - bricks, natural stones, etc.

Not suitable for porous concrete.

Application Areas:
- Ready to use
- Based on Silane, solvent free
- High productive, low consumption
- Optimized for non-pressure application
- Simple, quick and safe to use
- For high moisture penetration

Operation / Characteristics: Narrowing and water repellency of existing capillaries, thus interrupting the capillary absorbency.

Quality Control: Internal monitoring by our production laboratory

Technical Datas:
Material base Silane
Appearance milky, white paste
Viscosity (Mixture) 3500 - 5000 mPa·s
Density 0,80 kg/l
PH-Value

7

Consumption Injection Process ea. 10 cm masonry thickness about 0.1 l per meter. Depending on the absorbency of the masonry
Processing temperature (Building material temperature) not below 8°C
Flash Point > 100° C
Active ingredient about 80% wt.%
VOC content VOC free
Storage frost free
Shelf life original packing max. 8 months
Delivery form 600 ml sausage and 5 l plastic canister
All technical data relate to laboratory conditions 20°C / 65% RH

 


Processing:
Injection Creme C80 is injected through holes in the masonry. The drill holes are attached usually 20-30 cm in terrain height outside, or at floor level inside.

The injection tube adapted to the borehole diameter is inserted as far as possible into the hole. By slowly squeezing with simultaneous withdrawal of the injection pipe, a complete filling of the holes is to be achieved.

It is advisable to choose a drill hole spacing of 12cm and a hole diameter of 12-13mmThe drilling depth should reduced by approximately 2cm of the wall depth match. Before injecting free the holes from drilling dust.

The application is possible to a moisture penetration of approximately 95%.

After the injection material is fed into the ground, the close the drill holes with Injection Mortar.

General: Walls with large voids, hollow blocks, open cracks and joints are to be closed depending on the application with Injection mortar to prevent an uncontrolled outflow of the fluid.

Note: Lime, Gypsum or damaged cement plasters in the area of the injection process must be removed and be replaced with a Restoration.
Until about 30cm above the injection process, the area should be provided with vertically waterproofing prior to plastering.

Subsequent waterproofing: See separate Technical Product Data Sheet

Note:
a) As consumption should approximately 0.09 to 0.1 l per 10cm masonry thickness per meter. be sought, but the absorption of the substrate, the moisture penetration and the process play a crucial role.
b) The complete technology including injection material corresponds exactly to the current WTA leaflet 4-4-96.
c) In cavities in the masonry a before injection with the Injection Mortar is carried out.
d) Glass and anodized parts must be protected against pollution. Clean the tools and machines using water only.
e) Plasters can not be sealed.

Statements: H315 causes skin irritation

Safety instructions:
P102 Keep out of the reach of children.
P264.1 Wash hands thoroughly after handling.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P301/310 IF SWALLOWED: Immediately call a POISON CENTER or physician.
P332/313 If skin irritation: Get medical advice / get medical attention.



Data Sheet

Material Safety Data Sheet

 
 

We recommend following products:

KMR600-INJECTION-C80-Cartridge Gun - with injection sonde

KMR600-INJECTION-C80-Cartridge Gun - with injection sonde

For injection of the horizontal barrier injection cream

9400101299 KMR 600 INJECTION C80 Cartridge Gun - with injection sonde

Robust metal design with flexible hose connection - for sealing ascending moisture in masonry

 

69,48  (incl. Tax excl. Shipping costs)

Customers who bought this product bought also the following products:

Suction and filling syringe, volume 500ccm, with flexible exten

Suction and filling syringe, volume 500ccm, with flexible exten

10500299 Suction syringe / filling syringe FS 500 - filling capacity 1000ccm - steel, galvanized - with flexible extension 300mm

Set for processing injection cream C80 from 5 litre bucket

56,26  (incl. Tax excl. Shipping costs)
Steel Screw Packer ø10x75mms HD

Steel Screw Packer ø10x75mms HD

also suitable for high pressure injection

08130510 Steel Screw Packers ø10x75mms - with HD High Pressure Nipple H / DIN 71412

The ideal packers for injections, built structure seals and crack deep injection

 

1,33  (incl. Tax excl. Shipping costs)
Suction and filling syringe, volume 1000ccm, with flexible exten

Suction and filling syringe, volume 1000ccm, with flexible exten

10500399 Suction syringe / filling syringe FS 1000 - filling capacity 1000ccm - steel, galvanized - with flexible extension 300mm

Set for processing injection cream C80 from 5 litre bucket

63,57  (incl. Tax excl. Shipping costs)
KMR Plastic Plunger - 5 pieces

KMR Plastic Plunger - 5 pieces

Plastic Plunger for sachets

030603 Plastic Plunger KMR - Packing Unit ea. 5 pcs.

 

4,93  (incl. Tax excl. Shipping costs)
KMR600-INJECTION-C80 - complete Set

KMR600-INJECTION-C80 - complete Set

VOC-free injection cream against rising damp in masonry k

900101079.. KMR600-INJECTION-C80 - complete set

 

104,28  (incl. Tax excl. Shipping costs)
Special Injection-Guns - with 400 bar Manometer

Special Injection-Guns - with 400 bar Manometer

Excellent for Resin Injection

Control the pressure during the injection

1040530202

Special Side Lever Injection Guns 759.1 with 400 bar Manometer - filling volume ca. 550ccm bulk - connection thread M10x1,0 - incl. high pressure hose 300mm long and 4 jaws HQ-hydraulic coupler - for injection packers with HD-Nipple

with 400 bar pressure galvanized gauge, pressure relief, Teflon seal, in a polythene bag, press tube zinc plated, having a permanently rolled-up cover

121,92  (incl. Tax excl. Shipping costs)
[<<First] | [<Back] | [Next>] | 4 Articles in this categorie

How to reach us

MAFA-Sebald Produktions-GmbH

Langscheider Str. 45-47
58339 Breckerfeld
Deutschland

Telefon: +49 2338 9169-0
Fax: +49 2338 9169-40

E-Mail: info@mafa-sebald.com

Welcome back !

eMail Address:
Password:
Password forgotten?

payment Options

For registered users:
Invoice is also available!
Apply now for a non-binding customer account!


PayPal-Bezahlmethoden-Logo

Sichere Überweisung

Sicherer Umgang mit Ihren Daten

Reviews